Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 123 / 226

2-57
1010BXFM-3
Section 2
To start a Test Routine:
To scroll the cursor to the Test Routine you want to use press
To access the test option list press . Press to move the asterisk to [Yes].
To start the routine press
To end the routine press
ENT
2.9.8 THE TEST FACILITIES MENU
The Test Facilities menu provides commands for system analysis and recovery. The most
useful for the end-user is the [Makeup] command. Using these routines under the supervision
of our technical support staff will help us to provide technical analysis and solutions.
Makeup Commands the meter to re-acquire the receive signal.
Tx Up Forces upstream transmission only.*
Tx Dn Forces downstream transmission only.*
Fixed ALC Select “Yes” to command amplifier to hold a constant gain.*
TX Up Fixed ALC Fixed ALC while transmitting up only.*
TX Dn Fixed ALC Fixed ALC while transmitting down only.*
Force Transmit Transmits burst while measuring Valc. For diagnostic purposes
only. Not displayed as menu cell.
Force Frequency Not displayed as a menu cell.
* For technical service diagnostics.
TEST FACILITIES COMMANDS
Makeup NO
Graph YES
Tx Up NO
Tx Dn YES
Fixed ALC YES
Tx Up Fixed ALC NO
Tx Dn Fixed ALC NO
Right arrow invokes an In Process Makeup
Test Facilities
Controlotron 2 Channel [1] Channel 1
Samples/Cycle Digital sampling rate.
Max Damping Maximum signal damping. Use to average digital data when an unstable
condition occurs.
Min Damping Minimal signal damping. Use to average digital data when an unstable
condition occurs.
SITE SETUP MENU ITEMS (continued)
Siemens Hardware