Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 78 / 226

2-12
1010BXFM-3 Section 2
2.3.1 HOW TO SELECT A LIQUID CLASS
The liquids listed in the [Liquid Class] option list are representative samples of the class of
liquids to which they belong. Selecting a named liquid fills in the Estimated Vs (m/s), Viscosity
(cS) and Density (SG) parameters automatically. However, you have the option of editing
these parameters individually to fine tune the liquid settings. If you do not find a liquid that
matches your application, then you can select [Other]. This selection will not provide a liquid
name or automatic parameter entry.
Liquid Class
Controlotron 2 Channel [1] SITE1
Access Liquid Option List
Estimated Vs m/s 1377
Viscosity cS 2.30
Density SG 0.880
Select Liquid Diesel F
Use this menu cell to edit the
Estimated Vs ONLY if you are
sure of a more accurate value.
This will reduce the chances of
a re-spacing request for clamp-
on flow transducers during the
install procedure.
Use this menu cell to edit
the liquid viscosity ONLY
if you are certain that the
data you enter is
accurate. An erroneous
entry could affect meter
calibration.
Use this menu cell to
edit the specific
gravity of the liquid.
Liquid Table Table Active No
Yes
LiquIdent Slope x.xxx
(numeric entry)
Pressure Slope x.xxx
(numeric entry)
Base Temperature x.xxx
(numeric entry)
K0 x.xxx
(numeric entry)
K1 x.xxx
(numeric entry)
LiquIdent Index Add Index Index Value
(numeric entry)
1100 S.G. @ 400
(numeric entry)
1200 Visc cS @ 400
(numeric entry)
1330 Visc Slope @ 400
(numeric entry)
1350 Liquid Name ?
1380 K0 x.xx
1410 K1 x.xx
1420 Kill Index @ 400 No
1490 Yes
1579
Temp Range -40F to 450F
-40F to 250F
-40F to 375F
Pipe Configuration Fully Developed*
(Change to Upstream 1 Elbow
Piping) Dbl Elbow +
Dbl Elbow -
Valve
Expander
Reducer
Norm Entry
Header Inlet
Intrusions
Anomaly Diams xxxx (numeric entry)
APPLICATION DATA MENU STRUCTURE (continued)
Application Data
*Default