Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 87 / 226

2-21
1010BXFM-3
Section 2
2.4 THE PICK/INSTALL XDCR (TRANSDUCER) MENU
Use this menu after creating a new site setup in the Channel/Path Setup menu, and defining
the pipe parameters in the Pipe Data menu.
To select this function from the Main Menu:
Press until [Pick/Install Xdcr] is highlighted.
Press .
Based on pipe data (and optional application data) entries, the Pick/Install Xdcr menu auto-
matically identifies the most suitable transducers for the application. It recommends the ap-
propriate mounting mode (direct or reflect) and lists the Spacer Bar or Mounting Track part
number and spacing index. Ideally, you will be able to use the primary recommendations.
Controlotron Dual Path SITE 1
Scroll List and select desired Model
Liquid Class
Install Path 1
Transducer Model 991 Universal
Transducer Size 3
Xdcr Mount Mode Direct
Spacing Offset 3
Number Index 1
Spacing Method Track 3
Ltn Value -0.939
Install Complete? Yes
Empty Pipe Set MTYmatic
Once you select the
type, use this menu cell
to specify the
transducer size.
This menu cell
shows the actual
spacing distance
required between
the transducers.
This menu cell
identifies the spacing
index on the spacer
bar. You must use
this setting to mount
your transducers
properly.
Use this menu cell to
select the type of
transducer to be
installed.
This menu cell
allows you to select
a mounting mode.
*Use Reflect Mode
whenever possible.
Use this menu cell to
inform the meter that
you completed the
transducer mounting.
After the transducers are
operating, you can use
this menu cell to set the
empty pipe threshold.
This menu cell tells
you the model
number of the
appropriate
hardware for your
transducers and
spacing
requirements.
Siemens Hardware