Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 104 / 226

2-38
1010BXFM-3 Section 2
Min Base API
The [Min Base API] menu cell stores the minimum range for the API number analog span at
base temperature.
Max Base Kg/m
3
The [Max Base Kg/m
3
] menu cell stores the maximum range of Base kilograms per cubic meter
analog span.
Min Base Kg/m
3
The [Min Base Kg/m
3
] menu cell stores the minimum range of Base kilograms per cubic meter
analog span.
Max Viscosity cS
The [Max Viscosity cS] menu cell stores the maximum range for the analog span. The viscosity
units are centistokes with no alternatives offered.
Min Viscosity cS
The [Min Viscosity cS] menu cell stores the minimum range for the analog span. The viscosity
units are centistokes with no alternatives offered.
Max Temperature
The [Max Temperature] menu cell stores the maximum temperature range for the analog
span. If metric units are selected for pipe O.D., etc. the temperature units will be in Centi-
grade. If English units are selected, the temperature will be in Fahrenheit.
Min Temperature
The [Min Temperature] menu cell stores the minimum temperature range for the analog span.
If metric units are selected for pipe O.D., etc. the temperature units will be in Centigrade. If
English units are selected, the temperature will be in Fahrenheit.
2.6.2 SET ALARMS
The Alarm Setpoints menu allows you to select system alarm functions. Alarms appear locally
on the LCD digital display. In addition, you can use the Relay Setup menu to assign those
functions to the system’s relays. You may select from high or low energy or flow rate, liquid
interface (Vs) and liquid aeration alarm functions. Entry of all alarm setpoints is accomplished
using the selected rate units. You can enable or disable a Makeup Alarm Latch to keep the
makeup alarm active until you reset it manually by an <Fn>6 simultaneous key press.
To access the Alarm Setpoints menu press
High S.G.
This selection sets the High S.G. alarm function for the specific gravity of a selected liquid.
To set the High S.G. alarm value:
To activate numeric entry press .
Use PC numeric keys or Magnetic Wand to enter the High S.G. value.
To store the data press .
ENT