Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 88 / 226

2-22
1010BXFM-3 Section 2
Pick/Install Xdcr Install Path 1 or 2
Transducer Model 991 Universal
1011 Universal
1011 Hi Precision
Transducer Size
A1 A1 0A 0A A1H A1H
A2 0 A2H
B1 1 A3H
B2 2A B1H
B3 2 B2H
C1 3A C1H
C2 3 C2H
C3 4A D1H
D1 4 D2H
D2 5A D4H
D3 5
E1
E2
E3
Xdcr Mount Mode Direct
Reflect
Spacing Offset Minimum
Nominal
Maximum
Number Index 4
(generated)
Spacing Method Spacer Bar [P/N]
*
auto P/N generation
Ltn Value 2.00 (generated)
Install Complete? No [Yes]
*[Yes] indicates successful install
Install
Empty Pipe Set MTYmatic
Set Empty
Actual MTY
1011 Universal 991 Universal 1011H High Precision
PICK/INSTALL XDCR MENU STRUCTURE
NOTE: It would probably be most beneficial to you at this point to read Section 3
before proceeding to mount transducers.
NOTE: When installing transducers do not key in the V/M (Version/Modification) label
number as the Transducer Size.
However, you can edit the menu entries as required to accommodate different transducers or
mounting configurations. The Interface Detector will adjust its parameters to optimize per-
formance based on your selections. The Ltn menu cell shows the required spacing distance (in
inches or millimeters) between the upstream and downstream transducers. Use the [Install
Completed?] menu cell to inform the Interface Detector that you completed the physical mount-
ing of the transducers. You can define the empty pipe once the transducers are operational.