Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 158 / 226

4-2
1010BXFM-3
Section 4
4.2 THE TABLE SETUPS MENU
The [Table Setups] menu allows you to precondition your pipe table and transducer types.
The edits made in Table Setups become the default settings for creating a new site. Transduc-
ers “marked” in the Transducer Types menu will preferentially selected when the meter rec-
ommends transducers during the automatic Pick/Install Transducer routine.
To access the [Table Setups] menu press
*Note: The highlighted selection in the above table illustrates how to choose the ASA Stainless Steel Pipe
Class and all its available Pipe Name selections. All other Pipe Classes (e.g., ASA Carbon Steel)
listed can be selected in the same manner.
Ö Ú
Table Setups Pipe Table
Transducer Type
4.2.1 PIPE TABLE
The factory-programmed pipe table describes over sixty standard English and metric pipes.
The table can save you programming steps by loading all required data at once from option list
selection. The Pipe Table configuration is [PIPE CLASS
Î PIPE NAME]. Pipe Class presents
a list of standard metric and English Pipe classifications. Selecting a class (e.g., ASA Carbon
Steel) conditions the [Pipe Name] option list to all the stored pipes within that class (see
Menu Chart above). Selecting a pipe by its name (e.g., 2SS10) loads a description of that pipe
in the remaining menu cells. Note that liner data is not provided. If your pipe is lined, then
you will be required to enter the liner material and its thickness manually.
To access the [Pipe Table] menu press
(continued)
Create/Edit Pipe Choose Pipe Class
ASA Stainless Steel*
ASA Carbon Steel
ASA Plastic
Metric DN Steel
Metric SGP Steel
Cast Iron Table
Ductile Iron Table
Copper Tube Table
Choose Pipe Name
ASA Stainless Steel*
ASA Carbon Steel ASA Plastic
1SS10
1CS40 1P40
2SS10
1CS80 1P80
3SS10
2CS40 2P40
4SS10
2CS80 2P80
6SS10
3CS40 3P40
8SS10
3CS80 3P80
Metric DN Steel 4CS40 4P40
50 DN 4CS 4CS80 4P80
Ú
Ú
Ú
Ö
Ö
Ú
Ú
Ú
Ú
Ö
Ö
PIPE TABLE MENU STRUCTURE
Ú