Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 57 / 226

1-29
1010BXFM-3 Section 1
z
Pressing the <Right Arrow> changes the left-hand column to [Relay 1]. Pressing the <Right
Arrow> again accesses the option list. This expands the highlighted area to show the con-
tents of the list. Note that a “greater than” symbol (>) points to the top item on the list.
z
The <Up and Down Arrows> allow you to scroll the option lists. Every key press sequen-
tially moves the cursor to the next item. Due to the size of the display screen, some option
lists include more items than the display can show. For example, on the screen above the
last option shown is [Low Base API]. However, this option list has more listings. Continue
to press the <Down Arrow> to see more Relay selections. When you arrive at the last item
on a list, the next <Down Arrow> press brings you back to the top of the list. This is be-
cause the option lists are of the “wrap-around” type.
To select an option list item, move the cursor to the item and then press the <ENT> key.
This places your selection at the top of the list and moves you out of the option list to the
next menu cell. Examine the screen below. The option list item: [High LiquIdent] has been
selected. Note that this menu cell appears on the right-hand column and that the high-
lighted area moves to the next menu cell in the menu sequence: [Relay 2].
Relay Setup
Controlotron Channel [1] SITE1
Select a function for Relay 1
Relay 2 Power On
High LiquIdent
ens Low LiquIdent
S.G.
API
Kg/m
3
Base S.G.
Base API
Base Kg/m
3
Relay 1 >Off
Relay Setup
Controlotron 2 Channel [1] SITE1
Select a function for Relay 2
Relay 2 Off
Relay 1 High LiquIdent
Siemens Hardware