Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 74 / 226

2-8
1010BXFM-3 Section 2
2.2.1 HOW TO SELECT A PIPE CLASS
The 1010BX pipe tables are arranged by classes of common type and material. The default
selection is [Manual Entry]. As its name infers, you would use this selection to manually enter
individual pipe parameters. From the Main Menu, select [Pipe Data].
To select a Pipe Class:
To access the [Pipe Class] option list press
To scroll through the available classes press
To select the class that fits your application press
When you pick a Pipe Class, the [Select Pipe Size] menu cell (see below) presents the pipe size
option list associated with the selected class. By using the pipe class and pipe size option lists,
you automatically load all the required pipe information. You can also select a pipe class/size,
then edit any of the associated defaults to fine-tune the pipe data.
NOTE: Create custom pipe data via the Pipe Table editor in the Meter Facilities menu.
2.2.2 HOW TO SELECT A PIPE SIZE
Selecting a Pipe Size installs the selected pipe parameters into the balance of the [Pipe Data]
menu cells and prepares the 1010BX for Transducer selection and installation. This option is
not applicable if the Pipe Class is [Manual Entry].
ENT
Pipe Data (cont.) Pipe Material Steel
ABS
Aluminum
Black Iron
Brass
Cast Iron
CuNi (70/30)
CuNi (90/10)
Copper
Ductile Iron
FRP
Glass
Hastelloy
Inconel
Kynar (PVDF)
Monel
Nickel
Polyethylene
PVC (Plastic)
Teflon
Titanium
Wall Thickness x.xxx
(numeric entry)
Liner Material None
Cement
Coal Tar
Enamel
Glass
Plastic
HDPE
Teflon
Rubber
Liner Thickness x.xxx
(numeric entry)
THE PIPE DATA MENU STRUCTURE (continued)