Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 56 / 226

1-28
1010BXFM-3 Section 1
z
After you finish typing the string, press <ENTER> to register it. This creates a new site
setup called [SITE1]. This action prepares the 1010BX for installation by loading default
parameters in all the appropriate menu cells. Note that the [Recall Site] menu cell shows:
[No Sites] and that the [Save/ Rename Site] menu cell now lists the site name. Although,
you just created site setup SITE1, it will not be permanently stored until you invoke the
[Save/Rename Site] command.
1.16.2 SELECTING ITEMS FROM AN OPTION LIST
Examine the screen below. It shows how to use an option list to select a Relay Setup for your
application. How to access this menu will be explained later. Note that the menu name
[I/O Data Control] appears highlighted on the lower left of the screen. Note also that the menu
cell [Relay Setup] is highlighted. Note that the right-hand column has no data at this time.
Controlotron Site [1]
Recall Site Setup No Sites
Channel Enable No
Create/Name Site ?SITE1
„ „
„ „ „
Site Security Off Flow
Delete Site Setup No Sites
Save/Rename Site
Right arrow & Enter Creates a new Site
Channel Setup
Controlotron Site [1] SITE1
Recall Site Setup No Sites
Channel Enable No
Create/Name Site SITE1
Site Security Off
Delete Site Setup No Sites
Save/Rename Site SITE1
Use with Care -- Turn Security On or Off
Channel Setup
Controlotron Site [1] SITE1
Analog Out Setup
Relay Setup
Analog Inp Setup
Assign Alarm Data function to each relay
I/O Data Control