Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 109 / 226

2-43
1010BXFM-3
Section 2
2.7.1 DATALOGGER MODE
The [Datalogger Mode] option list allows you to disable Datalogger, transmit reports to an
external target via RS-232 port, or store selected data [Memory] for later display. The default
setting is [Off]. After enabling the Datalogger, select a data format before generating a report.
To select a Datalogger Mode:
To access the [Datalogger Mode] option list press
Move the cursor to the desired mode by pressing
To store the selection press
2.7.2 DATALOGGER DATA
Set the Datalogger to record any or all of the data offered on the [Datalogger Data] option list
shown below. However, recording unneeded data wastes valuable system RAM. We recom-
mend that you always select [Site ID] (name) and [Time] to identify each line of data.
ENT
Datalogger Setup Datalogger Mode Off
Memory
RS-232 Output
Datalogger Data None
Site Id
Date
Time
Raw
Path Vs
Vs
Path Valc
Valc
Aeration
Liquid Name
LiquIdent
S.G.
API
Kg/m3
Base S.G
Base API
Base Kg/m3
Path Alarms
Alarms
Temperature
Analog Inputs
Sonilocate
LogTime Interval 5 Sec.
10 Sec.
15 Sec.
30 Sec.
1 Min.
5 Min.
15 Min.
30 Min.
1 Hr.
2 Hr.
(continued)
THE DATALOGGER SETUP MENU STRUCTURE
Siemens Hardware