Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 63 / 226

1-35
1010BXFM-3 Section 1
z
To change the Transducer Model, press the <Right Arrow> to access the [Transducer Model]
option list and move the cursor down to [1011H Hi Precision]. Press the [ENTER] key to
select 1011H Hi Precision .
z
Note that the meter now presents you with a recommended transducer(s) in the top-line
prompt. You can now select the transducer you intend to use for this application.
Controlotron 2 Channel [1] SITE1
Transducer Model 1011 Universal
Transducer Size Select Xdcr
Xdcr Mount Mode Invalid
Spacing Offset Invalid Flow
Number Index Invalid
Spacing Method Invalid
Ltn Value Invalid
Install Complete? No
Empty Pipe Set Chan Not Setup
Scroll List and select desired Model
Pick/Install Xdcr
Transducer Model 1011 Universal
Transducer Size >1011H Hi Prec
Xdcr Mount Mode 991 Universal
Spacing Offset Invalid Flow
Number Index Invalid
Spacing Method Invalid
Ltn Value Invalid
Install Complete? No
Empty Pipe Set Chan Not Setup
Controlotron 2 Channel [1] SITE1
Scroll List and select desired Model
Pick/Install Xdcr
Controlotron 2 Channel [1] SITE1
Transducer Model 1011H Hi Prec
Transducer Size C1H
Xdcr Mount Mode Reflect
Spacing Offset Nominal Flow
Number Index 24
Spacing Method Spacer Bar 1012BP
Ltn Value 6.359
Install Complete? No
Empty Pipe Set Chan Not Setup
Recommended Xdcr Mount Mode [Reflect]
Pick/Install Xdcr
Siemens Hardware