Siemens SITRANS FUH1010PVX, Operating Instructions Manual, Page: 46 / 226

1-18
1010BXFM-3 Section 1
NOTE: This procedure is the first action required to start a new site setup.
The first time you access [Create/Name Site] you will see a “greater than” symbol and blank
second line (as shown in the left-hand figure below). Use to access the alphanumeric entry
field at the first character position. Note that the prompt changes to a question mark (?) as
shown in the right-hand figure below.
Create/Name Site
>
Create/Name Site
?_
Note site name
field is initially
blank.
(?) Indicates cell is
ready to accept data.
Cursor shown at 1
st
character position.
Create/Name Site
?SITE1
Site Security
>Off
Screen switches to
next menu cell after
entering site setup
name.
Cursor shown at
fifth character
position.
z
With the cursor at the first character position, use to scroll through the character list
until you see [S]. Use to move the cursor to the second position. Use to scroll the list
back down to [I]. Use to move the cursor to the third position. Use to scroll list to [T].
Use <ENTER> to move to the fourth position. Use to scroll list to [E]. Use to the fifth
position. Use <ENTER> to scroll list to [1]. (Numbers appear after you scroll down past
letter A as shown in the left-hand figure below.) Use
 to create the new site setup: SITE1.
This selects the next menu cell: [Site Security] as shown in the right-hand figure below.