Siemens SITRANS F Coriolis FCT030, Function Manual, Page: 149 / 198

Group Bit Alarm ID Restrictions Associated alarm
class
Alarm items 7
(Inputs and outputs
alarms)
0 Reserved 192
1 Reserved 193
2 Reserved 194
3 Channel 2 loop current in lower saturation 195 If channel configured
to current output
PA
4 Channel 2 loop current in upper saturation 196 PA
5 Channel 2 cable break 197 MA
6 Channel 2 output frequency too low 198 If channel configured
to frequency output
PA
7 Channel 2 output frequency too high 199 PA
8 Channel 2 pulse overflow 200 If channel configured
to pulse output
PA
9 Channel 3 loop current in lower saturation 201 If channel configured
to current output
PA
10 Channel 3 loop current in upper saturation 202 PA
11 Channel 3 cable break 203 MA
12 Channel 3 output frequency too low 204 If channel configured
to frequency output
PA
13 Channel 3 output frequency too high 205 PA
14 Channel 3 pulse overflow 206 If channel configured
to pulse output
PA
15 Channel 4 loop current in lower saturation 207 If channel configured
to current output
PA
16 Channel 4 loop current in upper saturation 208 PA
17 Channel 4 cable break 209 MA
18 Channel 4 output frequency too low 210 If channel configured
to frequency output
PA
19 Channel 4 output frequency too high 211 PA
20 Channel 4 pulse overflow 212 If channel configured
to pulse output
PA
21 Reserved 213
22 Channel 2 simulated 214 If channel configured
to output
FC
23 Channel 3 simulated 215 If channel configured
to output
FC
24 Channel 4 simulated 216 If channel configured
to output
FC
25 Process values frozen 217 FC
26 All outputs forced 218 FC
27 Channel 2 loop current deviation 219 MA
28 Channel 3 loop current deviation 220 MA
29 Channel 4 loop current deviation 221 MA
30 Invalid register mapping 222 MA
31 Invalid coil configuration 223 MA
MODBUS commands
4.10 Modbus holding registers tables
FCT030 Modbus (From firmware 4.0)
Function Manual, 06/2018, A5E39931813-AB
149