Commissioning
4.5 Commissioning with STARTER
Frequency inverters with Control Units CU230P-2 HVAC, CU230P-2 DP, CU230P-2 CAN
Operating Instructions, 01/2011, FW 4.4, A5E02430659B AD
77
Display options
In this area, you can set how the measurement results are displayed.
●
Repeat measurement:
This means that you place the measurements, which you wish to perform at different
times, one above one another
●
Arrange curves in tracks
This means that you define as to whether all measured values are to be displayed with a
common zero line – or whether each measured value is displayed with its own zero line.
●
Measuring cursor on:
This allows you to analyze the measuring intervals in detail
Figure 4-6
Trace dialog box
Summary of Contents for SINAMICS G120 CU230P-2
Page 2: ......