Connecting
4.3 Control/status interface - X8
SINAMICS V90, SIMOTICS S-1FL6
148
Operating Instructions, 04/2019, A5E36037884-007
Fast pulse train input position control (Fast PTI)
When connecting to different axes, the outputs are different. The diagram below takes the
connection with axis 0 for example.
1)
When connect to axis 1, the outputs are DO a.1 and DO a.7;
When connect to axis 2, the outputs are DO a.3 and DO b.0.
* The resistor R3 (200 Ohm to 500 Ohm) is required only if the speed for searching the
zero position exceeds 300 rpm.
**
The resistor R (200 Ohm to 500 Ohm, recommended power ≥ 5 W ) is required only if
the PTI input frequency exceeds 100 KHz.
