manualshive.com logo in svg

Ricoh Z-P2, Field Service Manual, Page: 518 / 654

Share
Download
Ricoh Z-P2 Field Service Manual Download Page 518

8471

PrtPGS/Mag

*CTL

[0 to 9999999/ 0 / 1 /step]

These SPs count by magnification rate the number of pages printed.

8-471-001 < 49%

8-471-002 50% to 99%

8-471-003 100%

8-471-004 101% to 200%

8-471-005 201% <

• Counts are done for magnification adjusted for pages, not only on the operation panel but

performed remotely with an external network application capable of performing magnification
adjustment as well.

• Magnification adjustments done with printer drivers with PC applications such as Excel are also

counted.

• Magnification adjustments done for adjustments after they have been stored on the document

server are not counted.

• Magnification adjustments performed automatically during Auto Reduce/Enlarge printing are

counted.

• The magnification rates of blank cover sheets, slip sheets, etc. are automatically assigned a rate of

100%.

8481

T:PrtPGS/TonSave

*CTL

8484

P:PrtPGS/TonSave

*CTL

These SPs count the number of pages printed with the Toner Save feature switched
on.
Note: These SPs return the same results as this SP is limited to the Print application.
[0 to 9999999/ 0 / 1]

8501

T:PrtPGS/Col Mode

*CTL

These SPs count the number of pages
printed in the Color Mode by the print
application.

8504

P:PrtPGS/Col Mode

*CTL

8507

O:PrtPGS/Col Mode

*CTL

8-50x-001 B/W

8-50x-002 Mono Color

5. System Maintenance Reference

516

Summary of Contents for Z-P2















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments