manualshive.com logo in svg

Ricoh Z-P2, Field Service Manual, Page: 46 / 654

Share
Download
Ricoh Z-P2 Field Service Manual Download Page 46

Item

SP No.

Function

Default

Meter Click
Charge

SP5-930-001

Enables or disables Meter Click Charge.
When enabled:

• The counter menu shows

immediately after you push the
"Menu" key. The "Counter Method"
(SP5-045) sets the type of the
counter.

• You can print the counter from the

counter menu.

When disabled:

• The counter menu does not show.

"0": OFF

Meter Click
Charge:
PCDU

SP5-930-010

Enables or disables the PM alert for the
PCDUs.
If this SP is enabled, an alert message is
displayed when the PCDUs need to be
replaced.

"1": No alert

Meter Click
Charge:
Image
Transfer Belt
Unit

SP5-930-014

Enables or disables the PM alert for the
image transfer belt unit.
If this SP is enabled, an alert message is
displayed when the image transfer belt
unit needs to be replaced.

"1": No alert

Meter Click
Charge:
Fusing Unit

SP5-930-016

Enables or disables the PM alert for the
fusing unit.
If this SP is enabled, an alert message is
displayed when the fusing unit needs to
be replaced.

"1": No alert

Counter
method

SP5-045-001

Specifies if the counting method used in
meter charge mode is based on
developments or prints.

"1": Prints

2. Installation

44

Summary of Contents for Z-P2















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments