manualshive.com logo in svg

Ricoh Z-P2, Field Service Manual, Page: 426 / 654

Share
Download
Ricoh Z-P2 Field Service Manual Download Page 426

5-307-001 ON/OFF

CTL

[ 0 to 1 / NA, EU, ASIA / 1 /step]
0: Disabled
1: Enabled
NA and EUR: 1, ASIA: 0

Enables or disables the summer time mode.

• Make sure that both SP5-307-3 and -4 are correctly set. Otherwise, this SP is not

activated even if this SP is set to "1".

5-307-003 Start

CTL

Specifies the start setting for the summer time mode.
There are 8 digits in this SP. For months 1 to 9, the "0" cannot be input in the first digit,
so the eight-digit setting for -2 or -3 becomes a seven-digit setting.
1st and 2nd digits: The month. [1 to 12]
3rd digit: The week of the month. [1 to 5]
4th digit: The day of the week. [0 to 6 = Sunday to Saturday]
5th and 6th digits: The hour. [00 to 23]
7th digit: The length of the advanced time. [0 to 9 / 1 hour /step]
8th digit: The length of the advanced time. [0 to 5 / 10 minutes /step]
For example: 3500010 (EU default)
The timer is advanced by 1 hour at am 0:00 on the 5th Sunday in March

• The digits are counted from the left.
• Make sure that SP5-307-1 is set to "1".

5-307-004 End

CTL

-

Specifies the end setting for the summer time mode.
There are 8 digits in this SP.
1st and 2nd digits: The month. [1 to 12]
3rd digit: The week of the month. [0 to 5]
4th digit: The day of the week. [0 to 7 = Sunday to Saturday]
5th and 6th digits: The hour. [00 to 23]
The 7th and 8 digits must be set to "00".

• The digits are counted from the left.
• Make sure that SP5-307-1 is set to "1".

5. System Maintenance Reference

424

Summary of Contents for Z-P2















































































































































































































































































































































































































































































































































































































































































Reviews:

No comments