Ricoh Aficio MP 4000 Operating Instructions Manual Download Page 119

Page: 119 / 1118

Problem

Cause

Solution

"Please wait." appears.

This message appears when
you turn on the operation
switch.

Wait for a while. If the machine does not
get ready in a minute, contact your
service representative.

"Please wait." appears.

This message appears when
the machine is warning up.

• Wait for a while. If the machine

does not get ready in a couple of
minutes, contact your service
representative.

• Wait until the message disappears.

Do not turn off the main power
switch while the message is
showing.

"Please wait." appears.

This message appears when
you change the toner
cartridge.

Wait for a while. If the message does not
disappear in two minutes, contact your
service representative.

"Memory is full. Do you want
to store scanned file?"
appears.

The scanned originals
exceed the number of
sheets/pages that can be
stored in the hard disk.

• Press [Store File] to store pages that

have been scanned. Delete
unnecessary files with [Delete File].

• Press [No] if you are not storing

pages that have been scanned.
Delete unnecessary files with
[Delete File].

The user code entry screen is
displayed.

Users are restricted by User
Code Authentication.

Enter the user code (up to eight digits),
and then press [OK].

The Authentication screen
appears.

Basic Authentication,
Windows Authentication,
LDAP Authentication or
Integration Server
Authentication is set.

Enter your login user name and user
password. See “When the
Authentication Screen is Displayed”,
About This Machine.

"Authentication has failed."
appears.

The entered login user name
or login password is not
correct.

Inquire the user administrator for the
correct login user name and login
password.

"Authentication has failed."
appears.

The machine cannot perform
authentication.

Contact the administrator.

When You Have Problems Operating the Machine

Summary of Contents for Aficio MP 4000






























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Aficio MP 4000

Reviews:

Related manuals for Aficio MP 4000

Brands by name

Popular brands

Ricoh Aficio MP 4000, Operating Instructions Manual

Search results

Summary of Contents for Aficio MP 4000

Reviews:

Related manuals for Aficio MP 4000

Brands by name

Popular brands