Renesas ZTAT H8S/2357F, Hardware Manual

Page: 120 / 1047

Rev.6.00 Oct.28.2004 page 92 of 1016
REJ09B0138-0600H
Figure 5-4 shows a block diagram of the priority decision circuit.
Interrupt
acceptance
control
8-level
mask control
Default priority
determination
Vector number
Interrupt control mode 2
IPR
Interrupt source
I2 to I0
Interrupt
control
mode 0
I
Figure 5-4 Block Diagram of Interrupt Control Operation
(1) Interrupt Acceptance Control
In interrupt control mode 0, interrupt acceptance is controlled by the I bit in CCR.
Table 5-6 shows the interrupts selected in each interrupt control mode.
Table 5-6 Interrupts Selected in Each Interrupt Control Mode (1)
Interrupt Mask Bits
Interrupt Control Mode I Selected Interrupts
0 0 All interrupts
1 NMI interrupts
2
×
All interrupts
×
: Don't care
(2) 8-Level Control
In interrupt control mode 2, 8-level mask level determination is performed for the selected interrupts in interrupt
acceptance control according to the interrupt priority level (IPR).
The interrupt source selected is the interrupt with the highest priority level, and whose priority level set in IPR is higher
than the mask level.
Table 5-7 Interrupts Selected in Each Interrupt Control Mode (2)
Interrupt Control Mode Selected Interrupts
0 All interrupts
2 Highest-priority-level (IPR) interrupt whose priority level is greater
than the mask level (IPR > I2 to I0).