Renesas ZTAT H8S/2357F, Hardware Manual

Page: 125 / 1047

Rev.6.00 Oct.28.2004 page 97 of 1016
REJ09B0138-0600H
5.4.4 Interrupt Exception Handling Sequence
Figure 5-7 shows the interrupt exception handling sequence. The example shown is for the case where interrupt control
mode 0 is set in advanced mode, and the program area and stack area are in on-chip memory.
(14)
(12)
(10)
(8)
(6)
(4)
(2)
(1)
(5)
(7)
(9)
(11)
(13)
Interrupt service routine instruction prefetch
Internal operation
Vector fetch
Stack
Instruction prefetch
Internal operation
Interrupt acceptance
Interrupt level determination Wait for end of instruction
Interrupt request signal Internal address bus Internal read signal Internal write signal Internal data bus
ø
(3)
(1) (2) (4) (3) (5) (7)
Instruction prefetch address (Not executed. This is the contents of the saved PC, the return address.) Instruction code (Not executed.) Instruction prefetch address (Not executed.) SP-2 SP-4
Saved PC and saved CCR Vector address Interrupt handling routine start address (vector address contents) Interrupt handling routine start address ((13) = (10) (12)) First instruction of interrupt handling routine
(6) (8) (9) (11) (10) (12) (13) (14)
Figure 5-7 Interrupt Exception Handling