Renesas ZTAT H8S/2357F, Hardware Manual

Page: 353 / 1047

Rev.6.00 Oct.28.2004 page 325 of 1016
REJ09B0138-0600H
9.12.3 Pin Functions
Mode 7*: In mode 7, port E pins function as I/O ports. Input or output can be specified for each pin on a bit-by-bit basis.
Setting a PEDDR bit to 1 makes the corresponding port E pin an output port, while clearing the bit to 0 makes the pin an
input port.
Note: * Modes 6 and 7 are provided in the on-chip ROM version only.
Port E pin functions in mode 7 are shown in figure 9-23.
PE
7
PE
6
PE
5
PE
4
PE
3
PE
2
PE
1
PE
0
Port E
(I/O)
(I/O)
(I/O)
(I/O)
(I/O)
(I/O)
(I/O)
(I/O)
Figure 9-23 Port E Pin Functions (Mode 7)
Modes 4 to 6*: In modes 4 to 6, when 8-bit access is designated and 8-bit bus mode is selected, port E pins are
automatically designated as I/O ports. Setting a PEDDR bit to 1 makes the corresponding port E pin an output port, while
clearing the bit to 0 makes the pin an input port.
When 16-bit bus mode is selected, the input/output direction specification by PEDDR is ignored, and port E is designated
for data I/O.
Port E pin functions in modes 4 to 6 are shown in figure 9-24.
Note: * Modes 6 and 7 are provided in the on-chip ROM version only.
PE
7
PE
6
PE
5
PE
4
PE
3
PE
2
PE
1
PE
0
Port E
D
7
D
6
D
5
D
4
D
3
D
2
D
1
D
0
(I/O)
(I/O)
(I/O)
(I/O)
(I/O)
(I/O)
(I/O)
(I/O)
8-bit bus mode 16-bit bus mode
(I/O)
(I/O)
(I/O)
(I/O)
(I/O)
(I/O)
(I/O)
(I/O)
Figure 9-24 Port E Pin Functions (Modes 4 to 6)