manualshive.com logo in svg

Renesas M32R/ECU Series, User Manual

The Renesas M32R/ECU Series offers cutting-edge electronic control units for automotive applications. Ensure optimal performance by utilizing the comprehensive User Manual available for free download from manualshive.com. This manual provides detailed instructions on how to maximize the capabilities of your ECU, enabling seamless integration and operation.

Share
Download
background image

(9)

16.1  Outline of the Wait Controller ----------------------------------------------------------------------------------------- 16-2

16.2  Wait Controller Related Registers ----------------------------------------------------------------------------------- 16-4

16.2.1

CS Area Wait Control Registers ---------------------------------------------------------------------------- 16-4

16.3  Typical Operation of the Wait Controller --------------------------------------------------------------------------- 16-6

CHAPTER 17  RAM BACKUP MODE

17.1  Outline of RAM Backup Mode ---------------------------------------------------------------------------------------- 17-2

17.2  Example of RAM Backup when Power is Down ----------------------------------------------------------------------- 17-3

17.2.1

Normal Operating State --------------------------------------------------------------------------------------- 17-3

17.2.2

RAM Backup State --------------------------------------------------------------------------------------------- 17-4

17.3  Example of RAM Backup for Saving Power Consumption ---------------------------------------------------- 17-5

17.3.1

Normal Operating State --------------------------------------------------------------------------------------- 17-5

17.3.2

RAM Backup State --------------------------------------------------------------------------------------------- 17-6

17.3.3

Precautions to Be Observed at Power-On --------------------------------------------------------------- 17-7

17.4  Exiting RAM Backup Mode (Wakeup) ------------------------------------------------------------------------------ 17-8

CHAPTER 18  OSCILLATOR CIRCUIT

18.1  Oscillator Circuit ---------------------------------------------------------------------------------------------------------- 18-2

18.1.1

Example of an Oscillator Circuit ---------------------------------------------------------------------------- 18-2

18.1.2

XIN Oscillation Stoppage Detection Circuit -------------------------------------------------------------- 18-3

18.1.3

Oscillation Drive Capability Select Function ------------------------------------------------------------- 18-5

18.1.4

System Clock Output Function ------------------------------------------------------------------------------ 18-7

18.1.5

Oscillation Stabilization Time at Power-On -------------------------------------------------------------- 18-7

18.2  Clock Generator Circuit ------------------------------------------------------------------------------------------------ 18-8

CHAPTER 19  JTAG

19.1  Outline of JTAG ---------------------------------------------------------------------------------------------------------- 19-2

19.2  Configuration of the JTAG Circuit ------------------------------------------------------------------------------------ 19-3

19.3  JTAG Registers ---------------------------------------------------------------------------------------------------------- 19-4

19.3.1

Instruction Register (JTAGIR) ------------------------------------------------------------------------------- 19-4

19.3.2

Data Register ---------------------------------------------------------------------------------------------------- 19-5

19.4  Basic Operation of JTAG ---------------------------------------------------------------------------------------------- 19-6

19.4.1

Outline of JTAG Operation ----------------------------------------------------------------------------------- 19-6

19.4.2

IR Path Sequence ---------------------------------------------------------------------------------------------- 19-8

19.4.3

DR Path Sequence -------------------------------------------------------------------------------------------- 19-9

19.4.4

Inspecting and Setting Data Registers -------------------------------------------------------------------- 19-10

19.5  Boundary Scan Description Language ----------------------------------------------------------------------------- 19-11

19.6  Notes on Board Design when Connecting JTAG ---------------------------------------------------------------------- 19-12

19.7  Processing Pins when Not Using JTAG ---------------------------------------------------------------------------- 19-14

CHAPTER 20  POWER SUPPLY CIRCUIT

20.1  Configuration of the Power Supply Circuit ------------------------------------------------------------------------- 20-2

20.2  Power-On Sequence ---------------------------------------------------------------------------------------------------- 20-3

20.2.1

Power-On Sequence when Not Using RAM Backup -------------------------------------------------- 20-3

20.2.2

Power-On Sequence when Using RAM Backup -------------------------------------------------------- 20-4

20.3  Power-Off Sequence ---------------------------------------------------------------------------------------------------- 20-5

20.3.1

Power-Off Sequence when Not Using RAM Backup -------------------------------------------------- 20-5

20.3.2

Power-Off Sequence when Using RAM Backup ------------------------------------------------------- 20-6

Summary of Contents for M32R/ECU Series








































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for M32R/ECU Series

XMOS xCORE-200 Multi-channel Audio board Design Manual preview
xCORE-200 Multi-channel Audio board
Brand: XMOS Pages: 112
TFortis Teleport-1 Configuration Manual preview
Teleport-1
Brand: TFortis Pages: 86
Barco ImagePRO-HD Installation Manual preview
ImagePRO-HD
Brand: Barco Pages: 121
Zoom B9.1ut Operation Manual preview
B9.1ut
Brand: Zoom Pages: 88
IDT USB-BRIDGEV2-EVAL Evaluation Board Manual preview
USB-BRIDGEV2-EVAL
Brand: IDT Pages: 11
Blackmagicdesign Teranex 2D Processor Installation And Operation Manual preview
Teranex 2D Processor
Brand: Blackmagicdesign Pages: 969
HighPoint RocketCache 3240X8 User Manual preview
RocketCache 3240X8
Brand: HighPoint Pages: 17
Arduino ABX00061 Reference Manual preview
ABX00061
Brand: Arduino Pages: 25
Divio SRA311-008P8 Series Installation Manual preview
SRA311-008P8 Series
Brand: Divio Pages: 4
IBM Power System H924 Installing Instructions preview
Power System H924
Brand: IBM Pages: 48
AXIOMTEK CEM500 Quick Installation Manual preview
CEM500
Brand: AXIOMTEK Pages: 2
Intel 500 - DATASHEET REV 003 Datasheet preview
500 - DATASHEET REV 003
Brand: Intel Pages: 67
HMS Anybus AWB3000 Startup Manual preview
Anybus AWB3000
Brand: HMS Pages: 18
Kordis NCB210X2-DS-AB Datasheet preview
NCB210X2-DS-AB
Brand: Kordis Pages: 31
YASKAWA 040-1CA00 Manual preview
040-1CA00
Brand: YASKAWA Pages: 87
Adaptec RAID 5085 Release Notes preview
RAID 5085
Brand: Adaptec Pages: 2
KTI Networks KGS-2421 Installation Manual preview
KGS-2421
Brand: KTI Networks Pages: 25
Magma ExpressBox4 1U Quick Installation Manual preview
ExpressBox4 1U
Brand: Magma Pages: 2

Brands by name

Popular brands

Load more brands