manualshive.com logo in svg

Renesas M32R/ECU Series, User Manual

The Renesas M32R/ECU Series offers cutting-edge electronic control units for automotive applications. Ensure optimal performance by utilizing the comprehensive User Manual available for free download from manualshive.com. This manual provides detailed instructions on how to maximize the capabilities of your ECU, enabling seamless integration and operation.

Share
Download
background image

(3)

6.4.2

Flash Status Registers ---------------------------------------------------------------------------------------- 6-5

6.4.3

Flash Status Register 2 (FSTAT2) ------------------------------------------------------------------------- 6-5

6.4.4

Flash Control Registers --------------------------------------------------------------------------------------- 6-7

6.4.5

Virtual Flash S Bank Registers ----------------------------------------------------------------------------- 6-11

6.5  Programming the Internal Flash Memory ---------------------------------------------------------------------------- 6-12

6.5.1

Outline of Internal Flash Memory Programming -------------------------------------------------------- 6-12

6.5.2

Controlling Operation Modes during Flash Programming -------------------------------------------- 6-17

6.5.3

P8 Data Register ----------------------------------------------------------------------------------------------- 6-18

6.5.4

Procedure for Programming/Erasing the Internal Flash Memory ----------------------------------- 6-20

6.5.5

Flash Programming Time (Reference) -------------------------------------------------------------------- 6-29

6.6  Virtual Flash Emulation Function -------------------------------------------------------------------------------------- 6-30

6.6.1

Virtual Flash Emulation Area -------------------------------------------------------------------------------- 6-31

6.6.2

Entering Virtual Flash Emulation Mode ------------------------------------------------------------------- 6-33

6.6.3

Application Example of Virtual Flash Emulation Mode ------------------------------------------------ 6-34

6.7  Connecting to A Serial Programmer ---------------------------------------------------------------------------------- 6-36

6.8  Internal Flash Memory Protect Function ----------------------------------------------------------------------------- 6-38

6.9  Precautions To Be Taken when Rewriting the Internal Flash Memory -------------------------------------- 6-39

CHAPTER 7  RESET

7.1  Outline of Reset ------------------------------------------------------------------------------------------------------------ 7-2

7.2  Reset Operation ----------------------------------------------------------------------------------------------------------- 7-2

7.2.1

Reset at Power-on --------------------------------------------------------------------------------------------- 7-3

7.2.2

Reset during Operation --------------------------------------------------------------------------------------- 7-3

7.2.3

Reset at Entering RAM Backup Mode -------------------------------------------------------------------- 7-3

7.2.4

Reset Vector Relocation during Flash Programming -------------------------------------------------- 7-3

7.3  Internal State Immediately after Reset ------------------------------------------------------------------------------- 7-4

7.4  Things to Be Considered after Reset --------------------------------------------------------------------------------- 7-4

CHAPTER 8  INPUT/OUTPUT PORTS AND PIN FUNCTIONS

8.1  Outline of Input/Output Ports ------------------------------------------------------------------------------------------- 8-2

8.2  Selecting Pin Functions -------------------------------------------------------------------------------------------------- 8-3

8.3  Input/Output Port Related Registers ---------------------------------------------------------------------------------- 8-5

8.3.1

Port Data Registers -------------------------------------------------------------------------------------------- 8-7

8.3.2

Port Direction Registers -------------------------------------------------------------------------------------- 8-8

8.3.3

Port Operation Mode Registers ----------------------------------------------------------------------------- 8-9

8.3.4

Port Peripheral Output Select Registers ------------------------------------------------------------------ 8-20

8.3.5

Port Input Special Function Control Register ------------------------------------------------------------ 8-21

8.4  Port Input Level Switching Function ---------------------------------------------------------------------------------- 8-24

8.5  Port Peripheral Circuits -------------------------------------------------------------------------------------------------- 8-27

8.6  Precautions on Input/Output Ports ------------------------------------------------------------------------------------ 8-31

CHAPTER 9  DMAC

9.1  Outline of the DMAC ------------------------------------------------------------------------------------------------------ 9-2

9.2  DMAC Related Registers ------------------------------------------------------------------------------------------------ 9-4

9.2.1

DMA Channel Control Registers --------------------------------------------------------------------------- 9-6

9.2.2

DMA Software Request Generation Registers ---------------------------------------------------------- 9-18

9.2.3

DMA Source Address Registers ---------------------------------------------------------------------------- 9-19

Summary of Contents for M32R/ECU Series








































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for M32R/ECU Series

D-Link DXS-3610-54S Quick Installation Manual preview
DXS-3610-54S
Brand: D-Link Pages: 38
D-Link Web Smart DES-1210-28P Selection Manual preview
Web Smart DES-1210-28P
Brand: D-Link Pages: 6
D-Link xStack Storage DSN-4000 Series Manual preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 23
D-Link Express EtherNetwork DI-604 Brochure preview
Express EtherNetwork DI-604
Brand: D-Link Pages: 7
D-Link xStack Storage DSN-4000 Series Cli User'S Manual preview
xStack Storage DSN-4000 Series
Brand: D-Link Pages: 97
Danfoss TFX Installation And Operation Manual preview
TFX
Brand: Danfoss Pages: 61
Idis DR-8400 Installation Manual preview
DR-8400
Brand: Idis Pages: 31
TDK HHM Series HHM2411 Specification Sheet preview
HHM Series HHM2411
Brand: TDK Pages: 2
Parker PCH1 T P Series User Manual preview
PCH1 T P Series
Brand: Parker Pages: 107
Glacier G2080TiFE Installation Manual preview
G2080TiFE
Brand: Glacier Pages: 2
Arduino ABX00061 Reference Manual preview
ABX00061
Brand: Arduino Pages: 25
Divio SRA311-008P8 Series Installation Manual preview
SRA311-008P8 Series
Brand: Divio Pages: 4
Supermicro X12SPO-NTF/-F User Manual preview
X12SPO-NTF/-F
Brand: Supermicro Pages: 131
Anthem Audio SFD-2 MkIII Jumper Configurations preview
SFD-2 MkIII Jumper
Brand: Anthem Audio Pages: 2
Microcomputer Systems MSI-P602 User Manual preview
MSI-P602
Brand: Microcomputer Systems Pages: 21
SmartBridges airPoint Nexus sB3210 User Manual preview
airPoint Nexus sB3210
Brand: SmartBridges Pages: 55
Rane CP 52S Operator'S Manual preview
CP 52S
Brand: Rane Pages: 6
ICP DAS USA VEX-112 Quick Start Manual preview
VEX-112
Brand: ICP DAS USA Pages: 8

Brands by name

Popular brands

Load more brands