manualshive.com logo in svg

Renesas M32R/ECU Series, User Manual

The Renesas M32R/ECU Series offers cutting-edge electronic control units for automotive applications. Ensure optimal performance by utilizing the comprehensive User Manual available for free download from manualshive.com. This manual provides detailed instructions on how to maximize the capabilities of your ECU, enabling seamless integration and operation.

Share
Download
background image

(1)

Table of contents

CHAPTER 1  OVERVIEW

1.1  Outline of the 32180 Group --------------------------------------------------------------------------------------------- 1-2

1.1.1

M32R Family CPU Core with Built-in FPU (M32R-FPU) --------------------------------------------- 1-2

1.1.2

1.1.2  Built-in Multiplier/Accumulator ---------------------------------------------------------------------- 1-3

1.1.3

Built-in Single-precision FPU -------------------------------------------------------------------------------- 1-3

1.1.4

Built-in Flash Memory and RAM ---------------------------------------------------------------------------- 1-3

1.1.5

Built-in Clock Frequency Multiplier ------------------------------------------------------------------------- 1-4

1.1.6

Powerful Peripheral Functions Built-in -------------------------------------------------------------------- 1-4

1.2  Block Diagram -------------------------------------------------------------------------------------------------------------- 1-5

1.3  Pin Functions --------------------------------------------------------------------------------------------------------------- 1-8

1.4  Pin Assignments ----------------------------------------------------------------------------------------------------------- 1-14

CHAPTER 2  CPU

2.1  CPU Registers ------------------------------------------------------------------------------------------------------------- 2-2

2.2  General-purpose Registers --------------------------------------------------------------------------------------------- 2-2

2.3  Control Registers ---------------------------------------------------------------------------------------------------------- 2-2

2.3.1

Processor Status Word Register: PSW (CR0) ---------------------------------------------------------- 2-3

2.3.2

Condition Bit Register: CBR (CR1) ------------------------------------------------------------------------ 2-4

2.3.3

Interrupt Stack Pointer: SPI (CR2) and User Stack Pointer: SPU (CR3) ------------------------- 2-4

2.3.4

Backup PC: BPC (CR6) -------------------------------------------------------------------------------------- 2-4

2.3.5

Floating-point Status Register: FPSR (CR7) ------------------------------------------------------------ 2-5

2.4  Accumulator ----------------------------------------------------------------------------------------------------------------- 2-7

2.5  Program Counter ---------------------------------------------------------------------------------------------------------- 2-7

2.6  Data Formats --------------------------------------------------------------------------------------------------------------- 2-8

2.6.1

Data Types ------------------------------------------------------------------------------------------------------- 2-8

2.6.2

Data Formats ---------------------------------------------------------------------------------------------------- 2-9

2.7  Supplementary Explanation for BSET, BCLR, LOCK and UNLOCK Instruction Execution ----------------- 2-14

2.8  Precautions on  CPU ----------------------------------------------------------------------------------------------------- 2-14

CHAPTER 3  ADDRESS SPACE

3.1  Outline of the Address Space ------------------------------------------------------------------------------------------ 3-2

3.2  Operation Modes ---------------------------------------------------------------------------------------------------------- 3-4

3.3  Internal ROM and Extended External Areas ------------------------------------------------------------------------ 3-5

3.3.1

Internal ROM Area --------------------------------------------------------------------------------------------- 3-5

3.3.2

Extended External Area -------------------------------------------------------------------------------------- 3-5

3.4  Internal RAM and SFR Areas ------------------------------------------------------------------------------------------ 3-6

3.4.1

Internal RAM Area --------------------------------------------------------------------------------------------- 3-6

3.4.2

SFR (Special Function Register) Area -------------------------------------------------------------------- 3-6

3.5  EIT Vector Entry ----------------------------------------------------------------------------------------------------------- 3-35

3.6  ICU Vector Table ---------------------------------------------------------------------------------------------------------- 3-36

3.7  Notes on Address Space ------------------------------------------------------------------------------------------------ 3-38

Summary of Contents for M32R/ECU Series








































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for M32R/ECU Series

Commell ES-270 User Manual preview
ES-270
Brand: Commell Pages: 36
Black Box LT2060A Manual preview
LT2060A
Brand: Black Box Pages: 37
janitza Procont LMC-008-IO User Manual And Technical Data preview
Procont LMC-008-IO
Brand: janitza Pages: 28
addlink SPIDER N4 Installation Manual preview
SPIDER N4
Brand: addlink Pages: 9
SIIG 1394 Dual-Port CardBus Quick Installation Manual preview
1394 Dual-Port CardBus
Brand: SIIG Pages: 8
Arbor Technology Em104P-i2904 Quick Installation Manual preview
Em104P-i2904
Brand: Arbor Technology Pages: 8
Omega OMB-DAQBOARD-500 Series User Manual preview
OMB-DAQBOARD-500 Series
Brand: Omega Pages: 48
Raven RFMOW V2 User Manual preview
RFMOW V2
Brand: Raven Pages: 33
Intel G6950 Documentation Update preview
G6950
Brand: Intel Pages: 51
WIN Enterprises PL-83300 User Manual preview
PL-83300
Brand: WIN Enterprises Pages: 25
Promax NGM EVO User Manual preview
NGM EVO
Brand: Promax Pages: 32
Reach Bee3 Plus User Manual preview
Bee3 Plus
Brand: Reach Pages: 21
B&B Electronics ESR901 User Manual preview
ESR901
Brand: B&B Electronics Pages: 90
Geekworm X735 User Manual preview
X735
Brand: Geekworm Pages: 10
Citizen IF1-ET01 User Manual preview
IF1-ET01
Brand: Citizen Pages: 26
Cisco 3005 Getting Started preview
3005
Brand: Cisco Pages: 122
ICP GDT8123RZ Specification preview
GDT8123RZ
Brand: ICP Pages: 2
ICP GDT6111RP User Manual preview
GDT6111RP
Brand: ICP Pages: 36

Brands by name

Popular brands

Load more brands