![background image](http://html2.mh-extra.com/html/quantum/snc-4500/snc-4500_user-manual_4004287082.webp)
76
Management Port Command Reference
The
get SpeedWriteDefault
command shows if SpeedWrite performance has been enabled or disabled for
newly-mapped SCSI devices. For an explanation of the SpeedWrite capability, refer to
set SpeedWrite SCSI
[sb st sl | all] [status]
on page 98.
Ready.
get speedwritedefault
SpeedWriteDefault = disabled
Ready.
get Temperature
The
get Temperature
command displays the current internal temperature of the SNC in degrees Celsius.
There is no
set
version of this command.
Ready.
get temperature
Temperature = 32 C
Ready.
get Time
The
get time
command displays the current time. Refer to
set Time [time]
on page 99.
Ready.
get time
Time = 14:47:17
Ready.
get TimeZone
The
get TimeZone
command displays the current time zone. The “+” and “-” represent a numerical offset
from GMT (Greenwich Mean Time). Refer to
set TimeZone [zone] [+/-:hh:mm]
on page 100.
Ready.
get timezone
TimeZone = EST
Ready.
get TraceLog
The
get TraceLog
command shows whether or not trace log recording has been enabled. Refer to
set
TraceLog [status]
on page 100.
Output
Meaning
enabled
Provides enhanced performance of WRITE commands for newly-mapped
SCSI devices
disabled
Retains the current level of performance of WRITE commands
CAUTION
Contact ATAC before using this command.
Output
Meaning
enabled
SCSI traffic is recorded to the Trace Log
Summary of Contents for SNC 4500
