![background image](http://html2.mh-extra.com/html/quantum/snc-4500/snc-4500_user-manual_4004287075.webp)
SNC 450x User’s Guide
69
get IPSubnetMask [port number]
The
get IPSubnetMask
command reports the current subnet mask, whether it is the default setting, or
whether it was assigned manually or by DHCP. Refer to
get IPSubnetMask [port number]
on page 69 and
set IPSubnetMask [port number ] [IP address]
on page 90.
The following is an example of the verbose output of a
get IPSubnetMask all
command:
Ready.
get ipsubnetmask all
5
; Port
SubnetMask
;=================================
DP0
255.255.0.0
DP1
255.255.0.0
MP0
255.255.0.0
Ready.
get iSCSIAlias
The
get iSCSIAlias
command displays the name assigned to the SNC. Refer to
set iSCSIAlias [alias]
on
page 90.
Ready.
get iscsialias
iSCSIAlias = ““
Ready.
get iSCSIChap
The
get iSCSIChap
shows if the CHAP has been enabled or disabled. Refer to
set iSCSIChap [status]
on
page 90.
Ready.
get iscsichap
iSCSIchap = disabled
Ready.
Port Number
Meaning
mp0
Ethernet management port labeled Ethernet port 2
dp0 or dp1
Ethernet data port labeled Ethernet port 0 or Ethernet port 1
all
All Ethernet port connections
CAUTION
Contact ATAC before using this command.
Output
Meaning
enabled
The SNC tries to negotiate CHAP (Challenge-Handshake Authentication
Protocol) authentication using the CHAP secret (password)
disabled
The SNC does not try to negotiate CHAP authentication
Summary of Contents for SNC 4500
