Quantum SNC 4500, User Manual

Page: 71 / 122

SNC 450x User’s Guide 65
ENET CRIT disabled
ENET FAIL disabled
XCOPY INFO disabled
XCOPY WARN disabled
XCOPY CRIT disabled
XCOPY FAIL disabled
NVRAM INFO disabled
NVRAM WARN disabled
NVRAM CRIT disabled
NVRAM FAIL disabled
ECC INFO disabled
ECC WARN disabled
ECC CRIT disabled
ECC FAIL disabled
PERF INFO disabled
PERF WARN disabled
PERF CRIT disabled
PERF FAIL disabled
GEN INFO disabled
GEN WARN disabled
GEN CRIT disabled
GEN FAIL disabled
Ready.
get DisplayTraceLogFilter [SCSI | all] [port number]
The get DisplayTraceLogFilter command displays trace log data for specific SNC ports when in
DisplayTraceLog mode. Refer to set DisplayTraceLogFilter [SCSI | all] [port number] [status] on page 85.
This command takes effect immediately.
The following is an example of the verbose output of a get displaytracelogfilter all command:
Ready.
get displaytracelogfilter all all
3
;Port Type Port Number Filter Status
SCSI 0 disabled
SCSI 1 disabled
Ready.
get DPMTU [port number]
CAUTION
Contact ATAC before using this command.
Port Number Meaning
0 or 1 SCSI connection labeled SCSI port 0 or SCSI port 1
all All SCSI connections
CAUTION
Contact ATAC before using this command.