![background image](http://html2.mh-extra.com/html/quantum/snc-4500/snc-4500_user-manual_4004287025.webp)
SNC 450x User’s Guide
19
1
Connect the cable supplied with your SNC to the SNC RS-232 serial port, and from there to the serial
(COM) port on a personal computer.
For the location of this port on the SNC 4500, see
Figure 8
. For its location on the SNC 4501, see
Figure
9
.
Figure 8
Serial Connector on the SNC 4500
Figure 9
Serial Connector on the SNC 4501
2
If you are using an SNC 4500 with a Scalar 100 and the library is off, turn on the library. After about 15
seconds, when the library has finished booting, turn on the SNC. If you are using the SNC 4501, just
turn on the library.
3
Start a terminal emulation program on the personal computer, and use it to connect to the SNC.
a. For example, if you are using HyperTerminal on a computer running a Windows operating
system, type
SNC450x
in the
New Connection
dialog box. Then click
OK
.
b. In the
Connect To
dialog box, for the
Connect using
field select the COM port number to
which your serial cable is connected. Then click
OK
.
In the
COM Properties
dialog box select the following values:
•
Bits per second: 115,200
•
Data Bits: 8
•
Parity: None
•
Stop Bits: 1
•
Flow Control: None
Summary of Contents for SNC 4500
