16
Getting Started
3
Connect sb0 on SNC 1 to the library controller.
4
Connect the library controller to drive 1.
5
Terminate drive 1.
6
Connect sb1 on SNC 1 to drive 2.
7
Terminate drive 2.
8
Connect sb0 on SNC 2 to drive 3.
9
Terminate drive 3.
10
Connect sb1 on SNC 2 to drive 4.
11
Terminate drive 4.
See
Figure 6
on page 17. Stop here if you have only four LTO-2 drives. If you have six LTO-2 drives,
proceed to
Step 12
. See
Figure 7
on page 18.
12
Connect sb0 on SNC 3 to drive 5.
13
Terminate drive 5.
14
Connect sb1 on SNC 3 to drive 6.
15
Terminate drive 6.
See
Figure 7
on page 18.
Summary of Contents for SNC 4500
