![background image](http://html2.mh-extra.com/html/quantum/snc-4500/snc-4500_user-manual_4004287086.webp)
80
Management Port Command Reference
Ready.
ping mp0 172.16.5.198
PING: size=64; num=4; net=MP0; addr=c60510ac
1 no reply
2 no reply
3 no reply
4 no reply
Ready.
ping mp0 172.16.76.198
PING: size=64; num=4; net=MP0; addr=c64c10ac
Reply from 172.16.76.198: [ 1] bytes=64 time=0 ms
Reply from 172.16.76.198: [ 2] bytes=64 time=0 ms
Reply from 172.16.76.198: [ 3] bytes=64 time=0 ms
Reply from 172.16.76.198: [ 4] bytes=64 time=0 ms
Ready.
reserve
Reservation of the SNC is implicit. Once the configuration image is changed by any user, the SNC becomes
reserved. Executing a
saveConfiguration
, a
restoreConfiguration
, or a
firmwareRestart
command
releases the SNC so that other users can access it. When the SNC is reserved,
set
commands from other
users are not executed but
get
commands will be executed. At least one interface must always have access
to the SNC. This command takes effect immediately.
Ready.
reserve
Reserve Successful
Ready.
restoreConfiguration [status]
The
restoreConfiguration [default|saved]
command changes the configuration to either the default
configuration or the configuration last saved into non-volatile memory. If you use “saved,” any changes
made since the last save are lost. Refer to
saveConfiguration <status>
on page 82. This command must be
followed by a power cycle.
IP Address
Meaning
xxx.xxx.xxx.xxx
The IP address you wish to ping
Optional Parameters
Meaning
count
Specifies the number of echo requests sent
size
Specifies the length, in bytes, of the data sent
Output
Meaning
enabled
Allows reservation of the SNC
disabled
Does not allow reservation of the SNC
Summary of Contents for SNC 4500
