Quantum SNC 4500, User Manual

Page: 74 / 122

68 Management Port Command Reference
; Port Address
;=================================
DP0 172.16.5.50
DP1 172.16.5.51
MP0 172.16.5.198
Ready.
get IPDHCP [port number]
The get IPDHCP shows if DHCP has been enabled or disabled for any or all SNC Ethernet ports. Refer to
set IPDHCP [port number] [status] on page 89. DHCP is disabled by default.
The following is an example of the verbose output of a get IPDHCP all command:
Ready.
get ipdhcp all
5
; Port
DHCP
;==========================
DP0 disabled
DP1 disabled
MP0 disabled
Ready.
get IPGateway [port number]
The get IPGateway command reports the current IP gateway, whether it is the default setting, or whether
it was assigned manually or by DHCP. Refer to set IPGateway [port number ] [IP address] on page 89.
The following is an example of the verbose output of a get IPGateway all command.
Ready.
get ipgateway all
5
; Port
Gateway
;=================================
DP0 172.16.1.44
DP1 172.16.1.44
MP0 172.16.1.44
Ready.
Port Number Meaning
mp0 Ethernet management port labeled Ethernet port 2
dp0 or dp1 Ethernet data port labeled Ethernet port 0 or Ethernet port 1
all All Ethernet port connections
Port Number Meaning
mp0 Ethernet management port labeled Ethernet port 2
dp0 or dp1 Ethernet data port labeled Ethernet port 0 or Ethernet port 1
all All Ethernet port connections