![background image](http://html2.mh-extra.com/html/quantum/snc-4500/snc-4500_user-manual_4004287090.webp)
84
Management Port Command Reference
Ready.
set bridgename Alpha
Ready.*
set Date [date]
The
set Date [mm|dd|yyyy]
command sets the date for the SNC if NTP has been disabled. Refer to
set
SNTP [status]
on page 97 and
get Date
on page 63. This command takes effect immediately.
The following example sets the date to 3/25/2004:
Ready.
set date 03/25/2004
Ready.
set DisplayEventLogFilter [subsystem] [level] [status]
The
set DisplayEventLogFilter
command controls what information is displayed for specific SNC
subsystems when issuing the
DisplayEventLog
command. The filter blocks information for one or all of the
SCSI buses and Ethernet ports. The default setting is ”disabled” for all subsystems and levels. Refer to
get
DisplayEventLogFilter [subsystem] [level]
on page 64. This command takes effect immediately.
Date format
Meaning
mm
Two-digit designation of desired month
dd
Two-digit designation of desired day
yyyy
Four-digit designation of desired year
CAUTION
Contact ATAC before using this command.
Subsystem Choices
GEN
ENET
NVRAM
PERF
XCOPY
ECC
ALL
Where:
GEN =
General
ENET =
Ethernet
ISCSI =
SCSI protocol of TCP/IP
NVRAM =
Non-Volatile Random Access Memory
PERF =
Performance
ECC =
Error Correcting/Correction Code
ALL =
All of the above
Summary of Contents for SNC 4500
