![background image](http://html2.mh-extra.com/html/quantum/snc-4500/snc-4500_user-manual_4004287085.webp)
SNC 450x User’s Guide
79
info
The
info
command displays version numbers and other product information for key components within the
SNC.
Ready.
info
Device
= "SNC 4500"
Serial Number
= IPB2500100000
Device Version
= 055E
Device Build
= 055E
Build Date
= "Oct
3 2003" 11:30:32
Flash Revision
= 11
CLI Revision
= 1.10
Bridge Name
="Alpha"
World Wide Name
= 20 00 00 10 86 10 48 68
Ready.
isReserved
The
isReserved
command displays the reservation status of the current SNC session. If the response is
Reserve Flag set,
the configuration image is being modified by another CLI session. The
set
commands are temporarily unavailable but
get
commands are available. Executing a
saveConfiguration,
restoreConfiguration
or
firmwareRestart
releases the SNC so that other users can access it. At least one
interface must always have access to the SNC. This command takes effect immediately.
Ready.
isreserved
Reserve Flag "NOT set"
Ready.
ping [port number] [IP address] <count> <size>
The
ping [mp0|dp] [xxx.xxx.xxx.xxx]<count> <size>
command sends an ICMP echo request from the
specified SNC management or data ports to the specified IP address. This command takes effect
immediately.
Output
Meaning
Reserve Flag NOT set
The configuration image is not being modified by another CLI session
Reserve Flag set
The configuration image is being modified by another CLI session. The
set
commands can not be issued to the SNC
CAUTION
If the host and SNC are on different subnets, ping may return
"Destination Net Unreachable." Check with your network
administrator to determine if pings across subnets have been
disabled for security reasons. If so, you will need to perform the ping
from a host on the same subnet as the SNC or rely on the host's iSCSI
initiator to enumerate the SNC data ports.
Port Number
Meaning
mp0
Ethernet management port labeled Ethernet port 2
dp0 or dp1
Ethernet data port labeled Ethernet port 0 or Ethernet port 1
Summary of Contents for SNC 4500
