![background image](http://html2.mh-extra.com/html/quantum/snc-4500/snc-4500_user-manual_4004287077.webp)
SNC 450x User’s Guide
71
get iSNSServer
The
get iSNSServer
specifies the IP address of a valid iSNS server the SNC uses to discover iSCSI
initiators. Refer to
set iSNSServer [IP address]
on page 92.
Ready.
get isnsserver
iSNSServer = 0.0.0.0
Ready.
get MaxOpTemp
The
get MaxOpTemp
command displays the maximum internal operating temperature of the SNC in
degrees Celsius. Valid values are from 55 to 70. Refer to
set MaxOpTemp [temperature]
.
Ready.
get maxoptemp
MaxOpTemp = 70 C
Ready.
get MinOpTemp
The
get MinOpTemp
command sets the minimum internal operating temperature of the SNC in degrees
Celsius. Valid values are from 0 to 15. The default setting is "0." Refer to
set MinOpTemp [temperature]
.
Ready.
get minoptemp
MinOpTemp = 0 C
Ready.
get OpTempWarn
The
get OpTempWarn
command displays the number of degrees Celsius before a thermal control event
warns you if the SNC is approaching the minimum or maximum internal operating temperature. The warning
is sent to the system log. Valid values are from 0 to 15. Refer to
set OpTempWarn [temperature]
.
Ready.
get optempwarn
OpTempWarn = 5 C
Ready.
CAUTION
Contact ATAC before using this command.
CAUTION
Contact ATAC before using this command.
CAUTION
Contact ATAC before using this command.
CAUTION
Contact ATAC before using this command.
Summary of Contents for SNC 4500
