Quantum SNC 4500, User Manual

Page: 69 / 122

SNC 450x User’s Guide 63
Firmware version A61Z release date Feb 4 2004, 14:06:50 Build A61Z
Power-On Self-Test Completion Status: GOOD
128 Megabytes of RAM Installed.
2 GbE Data Port(s).
2 LVD SCSI Interface Port(s).
Bridge World Wide Name = 20 00 00 10 86 50 00 1C
Bridge Serial Number = “IPB2500100136”
Bridge Name = “SNC 450x”
Internal Temperature = 25 C [0 - 70]
For help, type HELP.
Active Configuration = ADIC Config File
Feb 4 2004 14:06:50 A61Z Initialization Complete
Scsi interface 0 Register R/W test Passed
Scsi interface 0 Reset test Passed
Scsi interface 0 FIFO test Passed
Scsi interface 0 Master test Passed
Scsi interface 1 Register R/W test Passed
Scsi interface 1 Reset test Passed
Scsi interface 1 FIFO test Passed
Scsi interface 1 Master test Passed
Initializing Port DP0......................
Initializing Port DP1......................
Initializing Port MP0......................
GBE hardware Init done.
Ready.
get BridgeModel
The get BridgeModel displays model information about a specific SNC.
The following is an example of a verbose output from a get BridgeModel command:
Ready.
get BridgeModel
"SNC 450x"
(c)
Firmware version 055E release date "Oct.
3 2003", 11:30:32 Build 055E
Ready.
There is no set version of this command.
get BridgeName
The get BridgeName command displays the name assigned to the SNC. Refer to set BridgeName on page
83.
Ready.
get bridgename
BridgeName = "SNC 450x"
Ready.
get Date
The get date command displays the current date. Refer to set Date [date] on page 84.