![background image](http://html2.mh-extra.com/html/quantum/snc-4500/snc-4500_user-manual_4004287064.webp)
58
Management Port Command Reference
The
clearEventLog
command clears the contents of the event log. No events are recorded until the
command has been completed. This command takes effect immediately.
Ready.
cleareventlog
Ready.
clearTraceLog
The
clearTraceLog
command clears the contents of the trace log. No events are recorded until the
command has been completed.This command takes effect immediately.
Ready.
cleartracelog
Ready.
displayEventLog <scroll>
The
displayEventLog <+|-|=|<esc>>
command displays the most recent page of event log entries. Typing
a “+”, “-” or “=” (no quotation marks) causes the next, previous or same page of event log entries to be
displayed. No events are recorded until the command has been completed. Press
ESC
, then
Return
to exit
the command and return to CLI. New log entries begin.
The following is an example of a page of the
displayeventlog
command output, followed by a request for
the next page
(+)
, followed by
ESC
and
Return
.
Ready.
displayeventlog
Bridge Event Log
0137 10/08/2003 10:17:19 Bridge was booted/reset.
0138 10/08/2003 10:21:34 Bridge was booted/reset.
0139 10/08/2003 10:21:43 Unable to connect to an SNTP server
0140 10/16/2003 14:21:03 Bridge was booted/reset.
0141 10/16/2003 14:22:19 Bridge was booted/reset.
0142 10/16/2003 14:24:35 Bridge was booted/reset.
0143 10/17/2003 02:25:08 Unable to connect to an SNTP server
0144 10/17/2003 08:20:07 Bridge was booted/reset.
0145 10/17/2003 08:21:45 Bridge password was modified.
0146 10/17/2003 08:21:57 Bridge password was modified.
CAUTION
Contact ATAC before using this command.
CAUTION
Contact ATAC before using this command.
Scroll Meaning
+
Display the next page of trace log entries
-
Display the previous page of trace log entries
=
Display the same page of trace log entries
Summary of Contents for SNC 4500
