Quantum SNC 4500, User Manual

Page: 26 / 122

20 Getting Started
• Terminal type: ASCII
• Echo: on
c. Click OK .
4 After you connect to the SNC, you can see the following start-up messages. These messages are only
displayed at start-up. Messages actually displayed by your SNC will differ slightly from the sample
message printed below. The last line in the start-up message sequence is
Ready .
Uart is Initialized
DRAM Data Line Test Passed
SRAM Data Line Test Passed
BBRAM Data Line Test Passed
DRAM Address Line Test Passed
SRAM Address Line Test Passed
BBRAM Address Line Test Passed
DRAM Pattern Test 1 Passed
DRAM Pattern Test 2 Passed
DRAM Pattern Test 3 Passed
DRAM Pattern Test 4 Passed
SRAM Pattern Test 1 Passed
SRAM Pattern Test 2 Passed
SRAM Pattern Test 3 Passed
SRAM Pattern Test 4 Passed
BBRAM Pattern Test 1 Passed
BBRAM Pattern Test 2 Passed
BBRAM Pattern Test 3 Passed
BBRAM Pattern Test 4 Passed
DRAM Swap Pattern Test1 Passed
DRAM Swap Pattern Test2 Passed
DRAM Swap Pattern Test3 Passed
DRAM Swap Pattern Test4 Passed
***** Memory Tests Complete *****
Memory Clear Finished
EPLD Version 0 Detected
DS1629_DVC_TYPE initialized
ADIC SNC 450x
(c) 2003 ATTO Technology, Incorporated.
Firmware version A61Z release date Feb 4 2004, 14:06:50 Build A61Z
Power-On Self-Test Completion Status: GOOD
128 Megabytes of RAM Installed.
2 GbE Data Port(s).
2 LVD SCSI Interface Port(s).
Bridge World Wide Name = 20 00 00 10 86 50 00 1C