ASSEMBLY INSTRUCTIONS
GC09/12
ADJUSTABLE BENCH
GRINDER STAND
Model No: CBGS2
Part No: 6501142
Page 1: ...ASSEMBLY INSTRUCTIONS GC09 12 ADJUSTABLE BENCH GRINDER STAND Model No CBGS2 Part No 6501142 ...
Page 2: ...s intended purpose Faulty goods should be returned to their place of purchase No product can be returned to us without prior permission This guarantee does not effect your statutory rights ASSEMBLY 1 Slide the lower column into the base and secure with the two M10 x 10 setscrews 2 Slide the storage shelf over the lower column and secure with the two hex head bolts flat washers Fit the two wheel st...
Page 3: ...e bench grinder should be mounted with its centre of gravity as near to the centre of the table as possible Ensure that the correct size bolts from those provided are used for the size of holes in your grinder mountings and that flat washers are used to compensate for the oversize holes in the table The nuts should be nipped up firmly but be careful not to overtighten them Cable retaining hook Upp...
Page 4: ......
