Chapter 4: Configuring the Library
Setting the Date, Time, and Time Zone
Quantum Scalar i40 and Scalar i80 User’s Guide
51
• NTP server IP addresses must be entered in the proper format. See
Configuring Network Settings
on page 42 for the proper format of
IPv4 and IPv6 addresses.
• After you apply NTP settings, system clock synchronization may take
several minutes.
You can only enable and configure NTP on the Web client.
Web Client
1
Select
Setup > Date & Time
.
2
Refer to the library Web client online help for detailed instructions.
To view the help, click the
Help
icon in the upper right corner of the
screen.
Setting the Time Zone
To select your time zone from a list, disable
Use Custom Time Zone
setting and select your time zone.
If your time zone does not appear on the list, or you want more control
over your time settings, enable Use Custom Time Zone and set a
Universal Coordinated Time (UTC) offset.
You can only set the time zone via the Web client.
Web Client
1
Select
Setup > Date & Time
.
2
Refer to the library Web client online help for detailed instructions.
To view the help, click the
Help
icon in the upper right corner of the
screen.
Setting Daylight Saving
Time
If you selected your time zone from the drop-down list (see
Setting the
Time Zone
on page 51), the library automatically adjusts for daylight
saving time. There is no need to manually reset the clock for time
changes.
Summary of Contents for Scalar i40
