Quantum Scalar i40, User Manual

Page: 20 / 328

Preface
xx Quantum Scalar i40 and Scalar i80 User’s Guide
• Chapter 4, Configuring the Library provides instruction and
description for all the configurable features of the library.
• Chapter 5, Performing Library Operations explains how to run the
library from the operator panel and Web client.
• Chapter 6, Getting Information About the Library describes all of
the reporting features on the library.
• Chapter 7, Updating Firmware describes how to upgrade library
firmware and install and autolevel tape drive firmware.
• Chapter 8, Installing, Removing, and Replacing Components
provides detailed instruction on how to install, remove, and replace
all the physical components of the library.
• Chapter 9, Troubleshooting describes the library’s troubleshooting
tools, including diagnostic tickets, LEDs, and tests.
• Chapter 10, Working With Cartridges and Barcodes provides basic
information about how to label and care for media used in the
library.
• Appendix A, Specifications provides physical, environmental, power,
and other specifications about the library, tape drives, and media.
• Appendix B, TapeAlert Flag Descriptions lists all the Tape Alerts you
may encounter in a diagnostic ticket.
• Appendix C, Disposal of Electrical and Electronic Equipment
provides information on disposing and recycling.
The document concludes with a glossary and index.
Notational Conventions
This manual uses the following conventions:
Convention Example
File and directory names, menu
commands, button names, and
window names are shown in bold
font.
/data/upload
Menu names separated by arrows
indicate a sequence of menus to be
navigated.
Utilities > Firmware