![background image](http://html2.mh-extra.com/html/quantum/scalar-i40/scalar-i40_user-manual_3962593168.webp)
Chapter 6: Getting Information About the Library
Viewing the Library Configuration Report
142
Quantum Scalar i40 and Scalar i80 User’s Guide
Note:
Each partition is assigned a number and color. All slots
and tape drives that are assigned to a partition are
represented in the library map by the partition number
and color.
• In the library map, click a specific slot to view information about
the slot.
• In the library map, click a specific tape drive to view information
about the tape drive.
• In the library map, click the chassis number ( 0 ) below the tape
drives to view information about the chassis.
• Click Show Barcodes to display the barcodes for all imported
cartridges.
• By default, the Library Configuration Report displays the
coordinates for all licensed slots that are assigned to a partition.
To view all library slot coordinates, click
Show ALL coordinates
.
• To print the report, click the
icon in the upper right of the
screen.
Clicking on a resource (tape drive, slot, partition, or chassis) brings up a
detailed window containing the following information:
•
Tape Drives
— The following information is provided for each
installed tape drive:
•
Fibre Channel tape drive
— interface type, tape drive type,
state (ready/not ready), status (online/offline), assigned partition
name, location coordinates, media barcode (if media is in slot;
“No_Label” means unreadable barcode), media type (if media is
in the slot), element address, vendor, model, form factor (half
height or full height), physical SN, logical SN, world wide node
name (WWNN), world wide port name (WWPN), loop ID,
requested topology, requested speed, actual topology, actual
speed, maximum speed, tape drive firmware level, and whether
the tape drive is the control path for its partition.
•
Serial Attached SCSI (SAS) tape drive
— interface type, tape
drive type, state (ready/not ready), mode (online/offline),
assigned partition name, location coordinates, media barcode
(if media is in slot; “No_Label” means unreadable barcode),
Summary of Contents for Scalar i40
