Chapter 4: Configuring the Library
Configuring SNMP Settings
46
Quantum Scalar i40 and Scalar i80 User’s Guide
For more information about SNMP, see the
Scalar i40 and Scalar i80
Basic SNMP Reference Guide
(6-66773-xx).
For information on integrating MIBs with an SNMP management
application, contact your network management application vendor.
Registering External
Management
Applications
Administrative users can register transport protocols, IP addresses, and
port numbers of external management applications to enable them to
receive SNMP traps from the library. (By default, the library ignores all
SNMP SET operations, so external management applications cannot
register themselves to receive SNMP traps from the library.)
After registering the transport protocols, IP addresses, and
corresponding port numbers, you can perform a test to verify that the
library can send the SNMP traps to the addresses.
When registering external management applications to receive SNMP
traps, you can set the following parameters:
• Transport — The transport protocol. This should be the same as the
transport protocol configured on the SNMP trap receiver. Select one
of the following:
• UDP - User Datagram Protocol for IPv4
• UDP6 - User Datagram Protocol for IPv6
• TCP - Transmission Control Protocol for IPv4
• TCP6 - Transmission Control Protocol for IPv6
• Host Name/IP Address — The host name or the IP address of the
external management application you want to register. A host name
may be entered only if DNS is enabled. Otherwise, IP addresses must
entered. For information on DNS, see
Default Gateway, Subnet
Mask, Network Prefix, and DNS Addresses
on page 45.
• Port — the port number of the external application you want to
register. The default port number for an external application is 162.
You can only perform these functions from the Web client.
Web Client
1
Select
Setup > Network Management > SNMP Trap
Registrations
.
Summary of Contents for Scalar i40
