Quantum Scalar i40, User Manual

Page: 135 / 328

Chapter 5: Performing Library Operations
Shutting Down, Restarting, Turning Off, and Removing Power
Quantum Scalar i40 and Scalar i80 User’s Guide 109
5 Turn OFF the library by pressing the power button on the front
panel.
Web Client
1 Press Operations > System Shutdown .
2 Select Shutdown and click Apply .
3 Click OK to confirm.
4 Wait until the “ready to power down” message appears on the
operator panel (see Figure 24 ).
Figure 24 Ready to Power
Down Message
5 Turn OFF the library by pressing the power button on the front
panel.
Restarting the Library
Restart shuts down and then reboots the library's operating system and
firmware. During the reboot, the library performs an inventory of the
tape drives and magazine slots. The reboot takes approximately 5
minutes.
Operator Panel
1 Make sure the connected host applications are not sending
commands to the library and that all library operations have
stopped.
2 Press Actions > Shutdown > Restart Library .
3 Press Yes to confirm.