Quantum Scalar i40, User Manual

Page: 108 / 328

Chapter 4: Configuring the Library
Working With Local User Accounts
82 Quantum Scalar i40 and Scalar i80 User’s Guide
Modifying Local User
Accounts on the Web
Client
After a local user account has been created, administrative users can
modify the account settings, such as the password, privilege level, and
partition access. You cannot modify the user name. Instead, you will
need to delete the user account and create a new one (see Deleting
Local User Accounts on the Web Client on page 82).
Web Client
1 Select Setup > User Management > User Accounts .
The Setup - Users screen appears.
2 Select a user account and click Modify .
The Modify User Account screen appears, where User Name is the
name of the local user account.
3 Enter your Admin password to verify you have privileges to modify
the account.
4 Modify the password or privilege level, if desired.
5
If the user account has user privileges and you want to modify
partition access, click Next . The Modify User Account - User Name
screen appears, where User Name is the name of the user account.
This screen lists all library partitions, with the user’s assigned
partitions checked. Modify any of the partition selections.
6 Click Apply .
7 Save the library configuration (see Saving the Library Configuration
on page 101).
Deleting Local User
Accounts on the Web
Client
Administrative users can delete other local administrative user and user
accounts when they are no longer needed.
Note: You cannot delete the default administrative user account.
Web Client
1 Select Setup > User Management > User Accounts .
The Setup - Users screen appears.