![background image](http://html2.mh-extra.com/html/quantum/scalar-i40/scalar-i40_user-manual_3962593050.webp)
Chapter 2: Initial Installation and Setup
Turning the Library ON and Configuring Network Settings
24
Quantum Scalar i40 and Scalar i80 User’s Guide
Figure 15 Setup Wizard –
Current Configuration Screen
Do one of the following:
• To accept the current settings, press
Accept
.
• To change any of the settings, press
Change
. This will delete the
current partitions, and you are asked to confirm you want to do
this. If you agree, the library deletes the partitions, which take
about 30 seconds. When the partitions are deleted, you are
guided through several more screens to change the number of
partitions, I/E station slots, and cleaning slots. Use the
directional buttons as described in
Step 5
on page 21 and press
Accept
when complete.
• Partitions — The minimum number of partitions you can
create is one. The maximum is equal to the number of tape
drives installed in the library. The library assigns resources
proportionately among the partitions. You can change
resource allocation later via the Web client. For details, see
Working With Partitions
on page 52.
• I/E Station Slots — You can create a maximum of five I/E
station slots on a Scalar i40 and a maximum of ten on a
Scalar i80. The minimum is zero. Be aware that if you
configure zero I/E station slots, you will not be able to
import and export tape cartridges.
• Cleaning Slots — You can configure a minimum of zero and
a maximum of four cleaning slots.
Summary of Contents for Scalar i40
