Quantum Scalar i40, User Manual

Page: 101 / 328

Chapter 4: Configuring the Library
Configuring the Library E-Mail Account
Quantum Scalar i40 and Scalar i80 User’s Guide 75
(optional) for your SMTP server. E-mail account settings are not case-
sensitive.
Note: You may use a host name for the SMTP server instead of an IP
address only if the library is set up to use Domain Name System
(DNS) servers. See Default Gateway, Subnet Mask, Network
Prefix, and DNS Addresses on page 45 for more information.
After configuring the e-mail account, you can send a test message to an
e-mail address to verify that the account is configured properly.
You must have administrative privileges to configure the e-mail account.
You can configure the library e-mail account from the Web client only.
Web Client
1 Select Setup > Notification > E-mail Account .
The
Setup - E-mail Account
screen appears.
2 In the SMTP server text box, type the IP address or host name of the
SMTP server.
Note: IP addresses may be entered using the IPv4 dot notation or
using the IPv6 format. IPv4 addresses must be entered in
dot notation (for example, 192.168.0.1). IPv4 address text
boxes do not allow values exceeding 255 for dot-separated
values.
3 In the Sender E-mail Address text box, type an e-mail address for
the SMTP server (for example, scalar_i40@mycompany.com). The
sender address indicates the originator of the e-mail message.
4 For Send snapshot with e-mail notifications , do one of the
following:
• To attach a library snapshot file to e-mail notifications, select the
check box.
• To not attach a library snapshot file to e-mail notifications, clear
the check box.