Chapter 2: Initial Installation and Setup
Turning the Library ON and Configuring Network Settings
20
Quantum Scalar i40 and Scalar i80 User’s Guide
Figure 9 Turning on the Library
Power LED
Power
button
2
When initialization completes, the
Setup Wizard
screen appears on
the operator panel (see
Figure 10
). The operator panel screen
contains a menu bar with operations that correspond to the four
physical buttons below it. The menu operations and button
functions change with each screen.
Figure 10 Setup Wizard –
Initial Screen
Navigation/selection
buttons
Menu bar
3
Before proceeding, verify the Ethernet cable is connected and all of
your tape drives are installed.
4
Do one of the following:
• To configure basic network settings using the Setup Wizard,
press the button below
Next
on the menu bar. You will be
guided through a series of screens where you can accept or
change the default configuration settings (date, time, IP
address, licenses, partitions, I/E station slots, and cleaning slots).
Once you accept a setting, you move to the next one.
Summary of Contents for Scalar i40
