Quantum Scalar i40, User Manual

Page: 40 / 328

Chapter 2: Initial Installation and Setup
Before You Begin
14 Quantum Scalar i40 and Scalar i80 User’s Guide
Before You Begin
Refer to the following sections of this manual for important information
that you need when installing and setting up your library:
• Environmental Specifications on page 271
• Taking ESD Precautions on page 172
Unpacking the Library
Note: Unpack the library as close to the installation location as
possible.
1 Inspect the outer library packaging for damage. If there is any
damage evident on the library packaging, do not continue with the
installation and contact Quantum customer support.
2
Open the library packing box and remove the accessory kit and the
rail kit box (see Figure 6 ). Some configurations come with tape
drives installed in the library, and some come with tape drives
packaged separately. If yours comes with tape drives packaged
separately, remove them and set aside for installation later.