Chapter 4: Configuring the Library
Configuring Security Settings
98
Quantum Scalar i40 and Scalar i80 User’s Guide
3
Scroll to select Enabled or Disabled and press
Apply
.
4
Make another selection or press
Exit
.
5
Save the library configuration (see
Saving the Library Configuration
on page 101).
Internet Control
Message Protocol
(ICMP)
Enables or disables external attempts to discover the library by pinging
it (by means of the ICMP Echo packets. This setting is enabled by
default.
You may disable this feature if you are using IPv4, but you should NOT
do so if you are using IPv6. Disabling this feature disables all IPv6
communication on the Scalar i40 and Scalar i80. There will be no error
messages, and the library will appear to be working, but it will not be
communicating.
Caution:
Do NOT disable ICMP if you are using IPv6!
Operator Panel
1
Select
Setup > Security Services > ICMP
.
2
Press
Modify
.
3
Scroll to select Enabled or Disabled and press
Apply
.
4
Make another selection or press
Exit
.
5
Save the library configuration (see
Saving the Library Configuration
on page 101).
Remote Access Via Web
Client
Enables or disables remote access to the library via the Web client. This
setting is enabled by default (meaning remote access is allowed).
Operator Panel
1
Select
Setup > Security Services > Web client
.
2
Press
Modify
.
3
Scroll to select Enabled or Disabled and press
Apply
.
Summary of Contents for Scalar i40
